Reaver

Every saber is made from aircraft grade aluminium and comes in several different types of color schemes and finishing. Here, you decide which one is the best suited for your stunt saber.

Your stunt saber will be equipped with the in-hilt CREE XP-E2 LED which is the brightest model currently available. Choose the LED color that will illuminate your saber's blade.

• Mid grade blades have a wall thickness of 1.8mm (0.07"). It has a better weight distribution when attached to a saber and is suitable for up to medium contact dueling.

• Heavy grade blades have a wall thickness of 3.2mm (0.13"). Weight distribution is blade biased when attached to a saber and is suitable for full contact dueling.

Blade length is calculated based on the length of the entire blade including the tip. It is NOT calculated on the length of exposed blade after being inserted into the saber.

Your stunt saber is operated using a single large 16mm anti-vandal latching switch. By default, the color of the switch will match to the color scheme of your saber however you may specify otherwise.

Every saber has a Covertec wheel which is that protruding piece near the pommel. It allows you to hang the saber on your belt through a Covertec clip. By default, the color of the Covertec wheel will match to the color scheme of your saber however you may specify otherwise.

By default, your stunt saber is powered by 4x AAA non-rechargeable batteries. If you intent to use your saber very frequently, we strongly suggest upgrading to the rechargeable variant instead. 

Now that you have selected the rechargeable battery option, your stunt saber will come equipped with that as well as a 2.1mm recharge port located inside of the saber. By default, we will also provide a smart charger with interchangeable plug heads (no adapters required) however if you already have charger of your own, you can opt to exclude it and reduce the cost of the saber.

A blade plug is a safety accessory that is meant to be inserted into the emitter of a stunt saber which had its blade removed. Besides preventing a direct shine from the saber’s high power LED into someone’s eyes, it also provides aesthetic enhancements to the saber.

The Covertec Clip is an optional accessory that clips onto your belt and allows any Covertec Wheel equipped sabers to attach to it. This is typically used to hang a saber that already has its blade removed on your waist.

Every saber is made from aircraft grade aluminium and comes in several different types of color schemes and finishing. Here, you decide which one is the best suited for your FX saber.

Your FX saber is equipped with the Plecter Labs Pico Crumble V2.5 soundboard which is available in 2 flavors; light side or dark side. You need to decide which one you want and this cannot be changed afterwards. Click here to preview both sound fonts. 

• Mid grade blades have a wall thickness of 1.8mm (0.07"). It has a better weight distribution when attached to a saber and is suitable for up to medium contact dueling.

• Heavy grade blades have a wall thickness of 3.2mm (0.13"). Weight distribution is blade biased when attached to a saber and is suitable for full contact dueling.

Blade length is calculated based on the length of the entire blade including the tip. It is NOT calculated on the length of exposed blade after being inserted into the saber.

Your FX saber is operated using a single large 16mm anti-vandal momentary switch. By default, the color of the switch will match to the color scheme of your saber however you may specify otherwise.

The selected momentary switch can be upgraded to have ring illumination. There are multiple colors to choose from however it cannot be changed afterwards.

The selected momentary switch can be upgraded to have ring illumination. There are multiple colors to choose from however it cannot be changed afterwards.

The selected momentary switch can be upgraded to have ring illumination. There are multiple colors to choose from however it cannot be changed afterwards.

Every saber has a Covertec wheel which is that protruding piece near the pommel. It allows you to hang the saber on your belt through a Covertec clip. By default, the color of the Covertec wheel will match to the color scheme of your saber however you may specify otherwise.

A blade plug is a safety accessory that is meant to be inserted into the emitter of an FX saber which had its blade removed. Besides preventing a direct shine from the saber’s high power LED into someone’s eyes, it also provides aesthetic enhancements to the saber.

The Covertec Clip is an optional accessory that clips onto your belt and allows any Covertec Wheel equipped sabers to attach to it. This is typically used to hang a saber that already has its blade removed on your waist.

Every saber is made from aircraft grade aluminium and comes in several different types of color schemes and finishing. Here, you decide which one is the best suited for your Neo saber.

• Mid grade Neo blades have a wall thickness of 1.8mm (0.07"). It has a better weight distribution when attached to a saber and is suitable for up to medium contact dueling.

• Heavy grade Neo blades have a wall thickness of 3.2mm (0.13"). Weight distribution is blade biased when attached to a saber and is suitable for full contact dueling.

Neo blade length is calculated based on the length of the entire blade including the tip. It is NOT calculated on the length of exposed blade after being inserted into the saber.

Your Neo saber is operated using a large 16mm anti-vandal momentary switch. By default, the color of the switch will match to the color scheme of your saber however you may specify otherwise.

The selected momentary switch can be upgraded to have ring illumination. There are multiple colors to choose from however it cannot be changed afterwards.

The selected momentary switch can be upgraded to have ring illumination. There are multiple colors to choose from however it cannot be changed afterwards.

The selected momentary switch can be upgraded to have ring illumination. There are multiple colors to choose from however it cannot be changed afterwards.

Every saber has a Covertec wheel which is that protruding piece near the pommel. It allows you to hang the saber on your belt through a Covertec clip. By default, the color of the Covertec wheel will match to the color scheme of your saber however you may specify otherwise.

The blade plug + Neo Chip is a cosmetic accessory meant to be inserted into the emitter of a Neo saber when the Neo blade has been removed. The Neo Chip contains 7x addressable LEDs that will illuminate the attached blade plug when the saber is powered on.

The Covertec Clip is an optional accessory that clips onto your belt and allows any Covertec Wheel equipped sabers to attach to it. This is typically used to hang a saber that already has its blade removed on your waist.