custom sabers
CUSTOM SABERS
These are fully functioning custom sabers that are ready for action straight out from the box. It does not
require any separate purchase of other accessories to properly function. The features of these sabers are
dependent on which saber configuration your select.
-
Arclyte
Purchase
The Arclyte is the very first custom saber hilt created by Sabertrio. It is purposefully designed to be shorter and thus making it more agile especially for saber flourishing. The choke right below the emitter allows the saber to be spun easily while the knurling on the handle provides the friction needed for a strong two-handed grip.
-
SKYLAR
Purchase
The Sabertrio Skylar is designed to stay true to the elegant weapon that it was based upon. It features a slanted emitter with triple vents on each side while its primary activation switch is uniquely located on the left. This saber has two choke points flanking the switch area that allows for a very strong grip without sacrificing maneuverability.
-
AERYN
Purchase
With the Sabertrio Aeryn, comes forth one of the most iconic saber design elements in the galaxy; the thin-neck. Averaging at less than two thirds of an inch in diameter, the solid brass neck functions as the perfect choke while still being strong enough for full contact dueling. The grenade-inspired grip adds an additional level of detail to the saber and pays homage to the one it drew inspiration from.
-
VAHLKEN
Purchase
The Sabertrio Vahlken is designed to exude aggressiveness. It only takes a glance to recognize its distinctive features; an edgy octagon profile with sixteen large windows that lights up menacingly once the saber is ignited. The handle has four extruded rings evenly distributed across the length of the area to provide a solid yet comfortable grip.
-
MIRAH
Purchase
The Sabertrio Mirah, at its heart, is a duelist’s saber. With a streamlined profile and light body, the Mirah is as nimble as it is comfortable to wield. Accentuating its design is a curved slanted emitter and stylized horizontal window slits on both sides. Exclusive to the Mirah is its uniquely designed pommel that allows a small decorative dangling accessory to be attached to it.
-
REAVER
Purchase
With its three distinctive claws, uniquely shaped windows and highly detailed emitter, the Sabertrio Reaver easily distinguishes itself from the rest of the pack through its aggressive, but also elaborate design. The dual chokes and large lower section provides space for a strong grip when the Reaver is wielded on its own or as a saberstaff. Special attention has been made to ensure the saber has no sharp edges especially around areas where the hand is meant to grip.
-
VEKTRA
Purchase
In essence, the Sabertrio Vektra is all about balance. Featuring an afterburner styled emitter with elaborate windows, it is counteracted perfectly by a similarly designed pommel at the other end. Signature to the Vektra is the light ring; an acrylic piece that bridges the emitter sleeve with the saber’s choke to create a seamless surface that is comfortable to grip while allowing the blade’s illumination through.
-
SENZA
Purchase
There is more than meets the eye with the Sabertrio Senza. Fundamentally, it is meant to be a proper sports combat saber; from its overall length, wide grip area, to the three choke points, the Senza is designed to maximize your speed and control over it. Yet at the same time, when the specially made shrouds and control box are attached, the Senza transforms into an intricately designed and feature rich custom saber while still remaining supremely comfortable to wield.
-
Sologaard
Purchase
Comprising twelve precisely machined pieces, the Sologaard is one of the most intricately designed custom saber hilts by Sabertrio and is only second to its larger sibling. The prominently sized windowed emitter gives the Sologaard a strong presence that is then further amplified by an equally elaborate pommel. A subtle choke above the switch area paired with a more noticeable one below, and an overall slimmer grip section makes this saber truly ergonomic.
-
Krosgaard
Purchase
The Sabertrio Krosgaard inherits much of its smaller sibling’s distinctive features but subsequently defies saber design conventions. Flanking the main emitter on both sides and sitting almost flushed with it are intricately machined quillons that each houses a 5" long x 7/8” diameter side blade. The subtle choke right under the cross guard allows for the saber to be wielded comfortably in the most ideal position for balance. To date, Krosgaard is the most complex Sabertrio custom saber hilt.
-
Daemos
Purchase
At the core of its design, the Sabertrio Daemos is a perfect synthesis of mysticism, raw power and ergonomics. The most notable feature is the saber's silhouette which is largely defined by its intricately crafted emitter prongs and elaborate pommel. Its presence is further amplified by several emitter windows of different sizes that subtly hints at the chaotic nature of the saber. The main choke resides below the switch area while the prominent form of emitter prongs creates an alternative for those seeking to wield Daemos with more control.