The Saber Workbench custom saber display stand is shipped partially disassembled for it to be flat packed. By default, the pillar base is already attached to the workbench's base.

To assemble the Saber Workbench, attach a pillar to the vacant slot at the side of the pillar base and fasten it with two rounded cap screws using the provided hex key. Repeat this process with the remaining three pillars as shown in the visual above.

Next, place the logo plate stand into the square shaped slot on the workbench's base and fasten a rounded cap screw from the bottom, also using the provided hex key. Repeat it for the other slot. Finally, slot the bottom edge of the logo plate into the logo plate trench and rest it against the now installed logo plate stands.