using bluetooth
USING BLUETOOTH
This section covers how to connect your Bluetooth-enabled Power Core to a mobile device through using our recommended apps.
Notice
To determine if your Power Core is Bluetooth-enabled, check for a passkey label located between the soundboard and the speaker.Using Bluetooth - Neo CFX Saber
Step 1
You will need a mobile device running the iOS or Android operating system.
Download either the Crystal FX or ForceSync app.
Open the downloaded app and grant the required permissions.
Ensure that your mobile device’s bluetooth and location are both ON.
Step 2
Unscrew the pommel and slide out the Power Core.
Notice
For easy access, the Power Core is designed to slide out smoothly from the bottom of the saber hilt. To avoid any accidental drops, tilt the saber's bottom upwards when removing the pommel.Ensure that the killswitch is toggled to ON.
Find your Power Core’s unique bluetooth passkey, which is located between the soundboard and speaker.
Step 3
In the app, tap the device named S3 CFX POWERCORE LE and input your passkey when prompted.
Notice
If there are multiple bluetooth-enabled Power Cores nearby, you will see other devices with the same name. To ensure you are connecting to the correct one, hold the Power Core close to your mobile device and select the S3 CFX POWERCORE LE option with a max signal strength.Step 4
Slide the Power Core back in, ensuring that you do not press the speaker.
Reattach the pommel to secure the chassis inside the hilt.
Congratulations, you can now control your saber using your mobile device!